The Amina Ceiling Tile loudspeaker simply replaces a standard 600 x 600mm or 1200 x 600mm (other sizes made to order) amorphous ceiling tile to provide a 'near invisible' high quality voice and music solution for all types of environments fitted with suspended ceilings. This lightweight product places minimal stress on the suspended ceiling grid and allows an extremely fast and clean installation, avoiding the time and fraught task of cutting holes in ceiling tiles to position conventional ceiling speakers. The uniquely wide dispersion angle (in excess of 140 degrees) dramatically reduces the quantity of ceiling tile loudspeakers required, compared to conventional ceiling speakers. This allows large savings in installation time, with consequent reductions in overall system costs.



For voice reinforcement, place Amina Ceiling Tile loudspeakers every 10m, where the ceiling height is 1.5m above listening height. Place them every 15m where the ceiling height is 2.5m or more, above listening height. This will result in a worst case difference in Sound Pressure Level (SPL) of 6dB when moving from directly under the panel to the centre point between two panels. By comparison, conventional speakers are typically placed every 5m (for ceilings 1.5m above listening level), giving a four-to-one reduction in quantity required per project.

* Standard white or custom finish
* Simple & quick to install
* Unparalleled sound dispersion
* Eye bolts in each rear corner



Almost undetectable in ceiling
Reduced installation time
Fewer loudspeakers, reducing installation costs further Additional suspension points